Abalone Dehydrator
Abalone are marine snails, it is widely considered to be a desirable food, and is consumed raw or cooked by a variety of cultures. Abalone drying is unlike other food drying, it can not use high temperature to dry it. The IKE abalone dehydrator can dry abalone at low temperature, which will not damage the protein in abalone, also can better keep the nutritional value and extends their storage life.
How to dehydrate abalone
by IKE food dehydrator
Ingredients: abalone
Directions:
1. Choose fresh abalone and remove it’s cap, then slices it into 3~5mm.
2. Put abalone on the 65 degrees water for 3 minutes.
3. Take abalone out from water and lay them on trays and dry the water on the surface.
4. Set the temperature to 35 degrees, humidity 40%, and dried for 4 hours.
5. Then rise temperature to 40 degrees, set the humidity 25%, and then drying for 6 hours.
6. Stop the dehydrator for 2 hours. Then set 48 degrees, humidity 15%, drying time for 10 hours will finish the abalone drying process. If the abalone is smaller, you can shorten the time.
The dried abalone will regain moisture when they are in direct contact with the air, so a sealed package is required. If you use vacuum packaging, you can better preserve it.
![IKE-Abalone Dehydrator, Guangdong Ike Industrial Co,ltd]()
dried abalone
Choose IKE Abalone Dehydrator
Capacity: 20~100kg per batch
Power supply: 220V, 50Hz/60Hz
Drying Temperature: 20℃~80℃
The IKE commercial cabinet-type abalone dehydrator can be used only by connecting to the power supply. It is the smallest and easiest-to-operate heat pump abalone dehydrator of IKE Group. It uses heat pump technology to save energy. Drying takes place in a closed system, which keeps your abalone clean and hygienic.
View Equipment →
Capacity: 200~2500kg per batch
Power supply: 220V/380V, 50Hz/60Hz
Drying Temperature: 15℃~80℃
IKE industrial abalone dehydrators have a larger capacity compared to commercial cabinet-type abalone dehydrators. It can accommodate a significant volume of products for drying, making it suitable for industrial-scale drying solutions. The internal structure or accessories of the drying room can be customized to meet the specific requirements of drying different products. IKE industrial abalone dehydrator, no need to install, just plug in and use. Its design reduces shipping and installation costs for customers.
View Equipment →
Capacity: According to your needs
Power supply: 380V, 50Hz/60Hz
Drying Temperature: 15℃~80℃
IKE automatic continuous abalone dehydrator is an automatic drying equipment for large-scale drying abalone. The automatic continuous abalone dehydrator can run uninterruptedly, so that the abalone can be dried continuously, improving efficiency and productivity. It uses heat pump technology to minimize operating costs and environmental impact. IKE customized automatic continuous abalone dehydrator is compact and minimizes floor space requirements. Please tell us your drying needs.
View Equipment →
